Traffic Engineering

Road Markings and Signage - Speed Humps

We receive many requests from residents for these to be introduced in their roads to reduce speeds and improve safety.

There is usually opposition from the Police, Fire Brigade, Ambulance Service and Bus Companies to the use of speed control humps. The Emergency Services object because humps increase their attendance times for emergency calls, and thus risk the lives and property of the people.

The Ambulance Service and Bus Companies object because of the discomfort and possible injury that may be caused to their passengers and the increased wear and tear on vehicles, particularly buses going over speed tables every day.

There are regulations governing the layout of speed control humps. There must be a form of 'slowing feature' - usually formed by a change of priority (traffic entering the system has to turn sharp left or right into the road, or has to 'give way'. Sometimes mini roundabouts are used at the start of a system of humps.

The shape of speed control humps are strictly regulated. They must be between 50mm and 100mm high, at least 2.75 metres long and extend over the full width of the road, except for a drainage channel at either end. They may have either flat tops or round tops. Many local authorities have adopted the 75mm high hump as a standard. This is because it has been found to reduce traffic to around 22mph.

The 100mm high humps reduce speeds to 17mph on the hump but speeds rise to 35mph between the humps, causing excessive acceleration, braking and increased pollution.

Flat topped humps can be of any length and are often known as 'speed tables'. They are sometimes used to reduce the impact on long wheel base vehicles such as buses.

Speed control humps can lead to complaints about increased noise and sometimes increased vibration from traffic. They have however been proved to reduce traffic speed and they have been installed in many locations.

Contact

Mohammed Choudhury

Traffic and Highways

3rd Floor

Maritime House

1 Linton Road

Barking

IG11 8HG

Tel: 020 8227 3493

Fax: 020 8227 3231

Email: mohammed.choudhury@lbbd.gov.uk|